l Step 1: Confirm the percentage of appending proportion.
For example: If using forfilm blowing with PE material, the required percentage is 4%.
*The normal proportion is 2% - 4%. But it is not fixed. It depends on the buyer’s requirement.
l Step2: Mix the material and the masterbatch together by the blender mixer according to the appending proportion. If no blender mixer, it can be manual mixed.
For example: Put 100kg PE material and 4kg PE masterbatch into the blender mixer.
*NOTED: The carrier of masterbatch must be the same with the material.
l Step 3: Continue the film blowingprocess as normal.
Suggested Ratio Dosage:0.2-0.4%
Physical Properties:
esistance Temperature
280°C=536 °F
Granule Appearance Diameter
2.5mm-2.8mm
Melting Point
110 °C=230 °F
Addition Rate
2-4%
ROHS Index
Environmental
Packing:
cylindrical pellets,smooth surface,uniform colour, 25kgs per package